Before Installation, please prepare the toolkit and read the image friendly manual book for easier installation later.
Follow the instruction on the manual book, cut down the necessary parts.
After cutting down the parts, please follow the instruction manual book to install the part, make sure the attachment point of each part match.
Using the pliers can ensure the easier sticker process.
Try different posing on the gundam, refer to the manual book picture as a reference. Take Picture.
There are 2 types of Gundam marker for painting and ink drawing and 4 types for weathering. Each type is designed for a special use, so the level of finish improves if you use them according to the different purposes they were intended for.
The marker for painting uses good color smooth alcohol type paint, with a flat core pen point that is capable of painting everything from big open surfaces to tiny parts.
The ink drawing markers are oil-based markers with an ultra thin pen point, which is used for painting engraved parts. It fixes really well and provides a realistic finish easily.
The ink drawing brush marker is most suitable for painting even finer engraved parts. The pen point is a brush type, and special water-based ink is used, so it can be applied on any kind of basecoat and paint run off can be wiped off.
If you want a realistic finish, you should use a weathering marker especially for weathering painting. This is a water-based marker, so you can weather the parts without affecting the base. There is a wipe off type and paint type available for a realistic finish.
The eraser pen cleans up paint run off quickly just like a rubber eraser. By rubbing over the area run off, excess paint is dissolved and cleared.
1) Shake painting and weathering markers well with the cap on before usage.
2) When using for the first time or when ink does come out smoothly, press on the pen point. Be careful not to crush the tip.
